CQ195A-DP,CQ225A-CP, Self - Priming Deep Well Pump, Jet Pumps, Water Pumps

CQ195A-DP,CQ225A-CP, Self - Priming Deep Well Pump

• Product Name:
  Self - Priming Deep Well Pump
  
  
• Model Number:
  CQ195A-DP,CQ225A-CP
  
  
• Description:
  CQ SELF-PRIMING JET PUMP(FOR DEEP WELL)
  Operating conditions:
  1. Liquid temperature up to 60℃
  2. Ambient temperature up to 40℃
  3. Continuous duty
  Motor
  1. Two-Pole induction motor(n=2900r.p.m.)
  2. Insulation Class B/F
  3. Protection IP44
  
  Material
  1. Pump body: Cast Iron
  2. Motor Support: Cast Iron
  3. Impeller: Brass/Noryl
  4. Shaft with rotor: Hi-Cr plated 45# Steel/Stainless Steel
  5. Mechanical seal: Carbon/Ceramic
  
  220V/50Hz,230V/50Hz,110V/60Hz,115V/60Hz,127V/60Hz & 110V/220V dual voltage models are available on request
  

  Application: * Self-priming water pumps for deep suctions up to mt.30 to be used in case of important water level gaps.Suitable to drain water from wells and in domestic fittings by small and medium sized tanks. * Before installing the pump verify that all pipes(iron,plastic or rubber)are clean inside so to avoid any obstruction to the ejector nozzie.At the foot of the ejector must be installed a foot valve or a check valve.Installed the pump,fill completely both pipes and pump body with clean water.To preserve and efficient priming it is necessary a certain pression in the circuit,therefore it is recommended to install a membrane tank at the delivery of the pump.

  MODEL POWER INLET/ OUTLET MA*.FLOW (L/min) MA*.HEAD (m) MA*.SUCT (m) GW (kg) PACKING DIMENSION/UNIT (mm) QTY/20'CTN (unit) (kW) (HP) CQ195A-DP 0.37 0.5 11/4"*1" 32 30 410*200*220 1500 CQ225A-DP 0.55 0.75 11/4"*1" 40 35 15.7 410*200*220 1500 CQ370A-DP 0.7 1 11/4"*1" 42 38 16.8 410*200*220 1500

  
  
  Learn more about products detailed description, pricing and service, Please send mail to us!